LakeShark 2.23.2 is a handheld radio on the ESP32-P4. Use an RTL-SDR or HackRF, or the onboard LR2021. Decodes P25, ADS-B, POCSAG and FM. A Flipper Zero can drive it over Bluetooth.
New, experimental: LakeShark Desktop. Every app in windows on your PC from an ESP32-P4-NANO, and LakeShark Studio for writing your own. Install it below: choose ESP32-P4-NANO LakeShark Desktop. See LakeShark Desktop
Control LakeShark from your Flipper over Bluetooth. Tune the receiver and check its status while the LakeShark device stays in your bag or on the desk.
LakeShark receives and decodes the signals. The Flipper runs the companion app and provides the buttons and display. You can also use LakeShark's touchscreen without a Flipper.
Set Transport to UART and wire radio TX to Flipper RX, radio RX to Flipper TX, common GND. Do not feed the board from Flipper 5 V while it is also on USB.
Optional offline maps for MAP and ADS-B. On 2.23.2, open HOME > FIELD > MAP > TILES to download maps over Wi-Fi. The tools below also prepare map files for the Flipper.
Made in your browser. Nothing is uploaded.